今晚吃鸡棋牌
DongGuan cnauto automation equipment Co Ltd
总监在线
13713306830
valve
position:home > valve

Shop owner recommends: small flow dispensing valve with high

writer:xiaoliu time:2018-09-20 18:53 clicks:
  The small flow glue valve is suitable for the application of products with small glue output requirements. The glue outlet of this valve is relatively small. The glue outlet is relatively small for the production of glue products. The minimum glue output can reach 0.01ml. It can be used in the product seam and bottom filling glue links.
Small flow glue spreading valve

  Application of small flow glue spreading valve

  Because the glue amount is very small, so in some high-precision, less requirements for the glue amount of products, small flow glue valve is popular, in some products, the process of fine glue injection can be used in the seam with high-precision dispensing needle to complete the work of fine glue injection. When filling glue at the bottom of the product, if the glue used in the small flow glue valve appears quality problems, easy to cause glue solidification phenomenon, glue problems will cause a great impact on the application of glue valve, so before use must pay attention to check.
Small flow glue spreading valve

  Introduction of small flow glue dispensing valve

  The minimum glue output of the small flow dispensing valve can reach 0.01ml. In the process of filling the glue on the bottom of the product, the glue output will be affected because of the glue consistency and thinness. Then we can check the glue consistency and thinness before using to adjust the appropriate working parameters to avoid the glue problems affecting the product quality. This small flow glue valve is made of aluminum alloy, and there will be no damage to the glue valve when it is used for a long time in the production of filler glue on the bottom of the product. This small flow dispensing valve is suitable for many types of glue, in addition to the bottom filling glue, can also be used for UV glue, fast drying glue, epoxy resin glue and other special glue, but the premise is to ensure that the glue problem will affect the quality of the dispensing.
Small flow glue spreading valve
  The small flow dispensing valve with high precision glue control technology is still widely used in the production of high precision products, but the quality of glue must be tested before use, so as to avoid the glue problems caused by unqualified quality.
XML 地图 | Sitemap 地图