Thread glue is an anaerobic glue in the traditional sense. This kind of glue is used for bonding and sealing between products at room temperature. The effect of threaded glue with dispensing valve point needs to be selected according to the colloid property. Considering the special nature of this glue, special treatment should be taken. Therefore, the thread glue dispensing valve suitable for use in small edition is recommended for reference by users.
Attributes of threaded dispensing valves
This special point anaerobic threaded rubber valve has smaller volume, double cylinder configuration can further strengthen the driving glue strength. When the thread glue is dispensed, the glue can be dispensed quickly and timely, avoiding excessive influence on the flow time due to the nature of the glue itself. The pneumatic pressure drive is simple, convenient and fast. Connecting with the air compressor, the dispensing valve can be operated and controlled. The dispensing frequency is 120 (times/minutes), and the dispensing time can be adjusted (0.0). 1S), the two-position three-way solenoid valve controls the glue quantity accurately and responds quickly, and the anodized aluminium alloy has good corrosion resistance and strength, so the life of glue used for point thread glue is longer.
Thread Anaerobic Adhesive
The characteristics of low tapping time make it have high repetition accuracy for thread glue at product point, and need not be adjusted again. The tapping path is uniform and effective. The minimum tapping volume is 0.1 mm, and the backdraft force is strong to prevent the dripping and leakage of thread glue at the bottom of thread glue. Every execution cycle can be sucked back. Therefore, the practicability and value of thread glue dispensing valve will be enlarged, and the precision of product dispensing will be improved. It can be guaranteed.
It is very simple to choose a medium-sized threaded dispensing valve whether it is maintenance or put into use. The diaphragm separates the material chamber from the air chamber. The life of the threaded dispensing valve is longer, the adjustment of the amount of glue is more convenient and fast, so the precision is higher.