In fact, the function of CPU coated silica gel is the same as that of silicone coated graphics card. In order to make the thermal conductive silica gel play the role of thermal conductivity to heat sink, it is necessary to use this high viscosity thermal conductive gel as thermal conductivity to radiate heat sink. How to coat the silica gel used for thermal conductivity? Silicone pressure barrel can be used to store a variety of high-viscosity silica gel fluids for coating, including liquid silica gel yellow silica gel and even special coated silica gel. The amount of silica gel required for uniform coating of graphics cards can be satisfied by continuous and stable supply of silica gel pressure barrel. Of course, it is equally important to know how to coat silica gel.
Thermal Conductivity of Graphic Card Coated with Silica Gel
Improving Thermal Conductivity by Proper Silica Gel Coating
Thermal conductive silica gel silica grease
Here is a brief description of how to coat the silica gel and how to pay attention to it. The personal computer graphics card needs to coat part of the silica gel to promote thermal conductivity. First, remove the radiator and remove the dirty hair or residual silica grease that may adhere to it, and coat the silica gel on the contact gap between the radiator and the graphics card with a layer of silica gel. Although the silica gel pressure bucket can set parameters to control the flow rate, it is still recommended to coat thin. A layer of silica gel is enough. If it is coated too much, it will affect the thermal conductivity. If it is to be supplied quantitatively with special coated silica gel, it can also be coated with this pressure barrel.
Choosing the way of silica gel coated graphics card can improve the application life greatly, and the same quality assurance as CPU coated silica gel can improve the stable use of personal computers better.